Coax/Power Interface Blocks


*Cross Reference Now Available*
(See Below)

Coax/Power, Fixture + Receiver Interface Blocks

100% Compatible to ATE Industry “VG” Series

Compatible with H+W’s 1700pt Fixture and Receivers as well as most Teradyne/GenRad 2270/71 style Receivers. Note: These can be modified to be 100% compatible with Pylon/1280pt./RP19 Receivers, consult factory for details.

Features include: FR4/G10 material, Floating Alignment pins and bushings (where required), Lexan guide plates, P/N labeling, reference pin numbers are silk screened on front surface, mounting hardware, spring loaded contacts and receptacles are supplied by QA Technology or Interconnect Devices, Coax/Power contacts are VPC components.

 

Fixture Side I/F Block w/Contacts Installed
Part Number Description
SBF013NE
SBF032MP
SBF110ST
SBF136ST
SBF136RT
SBF170HF
13 Position Pneumatic Block
32 Position Medium Power, 20amp capacity/contact
110 Position Analog, Aligned Square tail rivets (same as 170pt Rivet Block, H191173)
136 Position for Ribbon Cable, Aligned Square tail rivets
136 Position for Ribbon Cable, Round tail rivets
170 Position Rivet Block, w/Floating Alignment Feature, Aligned Square tail rivets

 

Receiver Side I/F Block w/Contacts Installed
Part Number Description
SBR013NE
SBR032MP
SBR110ST
SBR136ST
SBR136RT
SBR170HF
13 Position Pneumatic Block
32 Position Medium Power, 20amp capacity/contact
110 Position Analog/Shielded, square tail sockets (170pt. block w/ground plane mounted on backside)
136 Position for Ribbon Cable, square tail sockets
136 Position for Ribbon Cable, round tail sockets
170 Position Probe Block, w/Floating Alignment Feature, Aligned Square tail sockets,

 

Fixture Side I/F Block w/out Contacts Installed
Part Number Description
SBF004CX
SBF009CX
SBF013CP
SBF015CP
SBF024CP
SBF032CP
SBF039GP
4 Position Coax, 18 Ghz, Block
9 Position Coax, w/Floating Alignment Feature, 18 Ghz, Block
13 Position Coax, w/Alignment Feature, 500 Mhz, or Power, 50A, Block
15 Position Coax, w/Alignment Feature, 500 Mhz, or Power, 50A, Block
24 Position Coax, w/Alignment Feature, 1 Ghz, or Power, 50A, Block
32 Position Coax, w/Alignment Feature, 1 Ghz, or Power, 50A, Block
39 Position, w/Floating Alignment Feature, Combination 19 + 20 Signal, Power and/or Coax

 

Receiver Side I/F Block w/out Contacts Installed
Part Number Description
SBR004CX
SBR009CX
SBR013CP
SBR015CP
SBR024CP
SBR032CP
SBR039GP
4 Position Coax, 18 Ghz, Block
9 Position Coax, 18 Ghz, Block
13 Position Coax, w/Floating Alignment Feature, 500 Mhz, or Power, 50A, Block
15 Position Coax, w/Floating Alignment Feature, 500 Mhz, or Power, 50A, Block
24 Position Coax, w/Floating Alignment Feature, 1 Ghz, or Power, 50A, Block
32 Position Coax, w/Floating Alignment Feature, 1 Ghz, or Power, 50A, Block
39 Position, w/Floating Alignment Feature, Combination 19 + 20 Signal, Power and/or Coax

 

Contact Pins and Cables for Fixture Side I/F Blocks
Part Number Description
CPF004CX
CPF009CX
CPF013/015CX
CPF013/015CX-50
CPF013/015CX-SMB
CPF013015CX2SMB
CPF013/015PW
CPF024/032CX
CPF024/032PW
Coax Contact for 4 Position Block, 18 Ghz
Coax Contact for 9 Position Block, 18 Ghz
Coax Contact for 13 or 15 Position Block, 500 Mhz
Coax Contact for 13 or 15 Position Block, 500 Mhz, Has 36″ RG174 Cable attached.
Coax Contact for 13 or 15 Position Block, 500 Mhz, Has 36″ RG174 Cable w/SMB Jack attached.
Cable Only, 36″ RG174 with SMB Jacks on Both Ends.
Power Contact for 13 or 15 Position Block, 50 amp
Coax Contact for 24 or 32 Position Block, 1 Ghz, Has 36″ RG174 Cable attached.
Power Contact for 24 or 32 Position Block, 50 amp

 

Contact Pins and Cables for Receiver Side I/F Blocks
Part Number Description
CPR004CX
CPR009CX
CPR013/015CX
CPR013/015CX-50
CPR013/015PW
CPR024/032CX
CPR024/032PW
Coax Contact for 4 Position Block, 18 Ghz
Coax Contact for 9 Position Block, 18 Ghz
Coax Contact for 13 or 15 Position Block, 500 Mhz
Coax Contact for 13 or 15 Position Block, 500 Mhz, Has 36″ RG174 Cable attached.
Power Contact for 13 or 15 Position Block, 50 amp
Coax Contact for 24 or 32 Position Block, 1 Ghz, Has 36″ RG174 Cable attached.
Power Contact for 24 or 32 Position Block, 50 amp

Specifications subject to change without notice. Consult H+W for Latest Design Changes. REBOUNDER®, Rebound Strip®, Quick Twist®, Test-Assured™, Linear Touch™ and Co-Active Seals™ are trademarks or registered trademarks of H+W Test Products, Inc. Patent Number 5,430,385 & 6,054,869

0001