Mechanical Fixtures – Printed Circuit Board Test Fixtures


Mechanical Test Fixtures, used for FUNCTIONAL or IN-CIRCUIT type testing.
Available with ESD Lexan, ESD G10 and ESD Pressure Pins

H+W Test Products has developed a series of inexpensive mechanical test fixtures. These fixtures are designed for testing low volume runs of printed circuit boards or prototype applications requiring approximately 150 test points. All H+W products are backed-up with our “Test-Assured™” one year warranty-in-writing and SAME DAY SHIPMENTS.

H+W “ESD” Mechanical Fixtures come with w/ESD Impregnated Lexan Top Plates, ESD Impregnated G10/FR4 Probe Plates and ESD Impregnated Delrin Tipped Pressure Fingers.

 

H+W Mechanical Fixtures, w/Non-ESD Plates & Nylon Pressure Pins
Part # Maximum Board Size Overall Fixture Size # Pressure Pins
FC20001A
FC21001A
FC22001A
5″ x 9″ (127 x 229)
9″ x 13″ (229 x 330)
13″ x 17″ (330 x 432)
8″ x 12″ (203 x 305)
12″ x 16″ (305 x 406)
16″ x 20″ (406 x 508)
15
15
30
H+W Mechanical Fixtures, w/ESD Lexan & ESD Pressure Pins
Part # Maximum Board Size Overall Fixture Size # Pressure Pins
FC20004A
FC21004A
FC22004A
5″ x 9″ (127 x 229)
9″ x 13″ (229 x 330)
13″ x 17″ (330 x 432)
8″ x 12″ (203 x 305)
12″ x 16″ (305 x 406)
16″ x 20″ (406 x 508)
15
15
30
H+W Mechanical Fixtures, w/ESD: Lexan, Probe Plate, & Pressure Pins
Part # Maximum Board Size Overall Fixture Size # Pressure Pins
FC20044A
FC21044A
FC22044A
5″ x 9″ (127 x 229)
9″ x 13″ (229 x 330)
13″ x 17″ (330 x 432)
8″ x 12″ (203 x 305)
12″ x 16″ (305 x 406)
16″ x 20″ (406 x 508)
15
15
30

 

H+W Mechanical Fixture Accessories

 

 

Adapter Box Fixtures, Non-ESD G10 Plate
Part Number Description
FC20003A
FC21003A
FC22003A
8″ x 12″ (203 x 305)
12″ x 16″ (305 x 406)
16″ x 20″ (406 x 508)
Adapter Box Fixtures, w/ESD G10 Plate
Part Number Description
FC20043A
FC21043A
FC22043A
8″ x 12″ (203 x 305)
12″ x 16″ (305 x 406)
16″ x 20″ (406 x 508)

 

 

Pan Riser Assembly
Part Number Description
FC20202
FC21202
FC22202
4″ (102) Pan Riser
4″ (102) Pan Riser
4″ (102) Pan Riser

 

 

Riser Block Assembly
Part Number Description
FC20501
FC20601
1/2″ (13) Riser Kit All fixtures
1″ (25) Riser Kit All fixtures

 

 

Front Latch Assembly
Part Number Description
FC20403 FC20-1-2 Fixtures

 

 

Rear Hinge Assembly
Part Number Description
FC20406 FC20-1-2 Fixtures

 

 

Pressure Finger Assembly
Part Number Description
STD0001
STD0014*
15 2.5″ (65mm) Studs/30 Nuts
15 2.5″ (65mm) Studs/30 Nuts
*ESD Delrin Tip, pressed on end.

 

H+W Mechanical Fixtures Include:
• Side Handles
• Probe Plate Latch Assembly
• Probe Plate Hinges
• Self Positioning Springs in Pan
• Self Positioning Lexan Plate Springs
• Drilling Alignment Holes in both Plates
• 4″ (102) Deep Pans, Expandable to 8″ (203)
• Insulated Nylon Pressure Fingers
• Removable Base Pan Panels